WAYLIGHT

IN
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral driver.
  • - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V
071020 LED 25.2 W 120-277 V 80 3000 - 12° 2808 1984 L80 - 60000 Download

Documentation: WAYLIGHT 1250 LED [49.21“] - 071020

071022 LED 25.2 W 120-277 V 80 4000 - 12° 3192 2246 L80 - 60000 Download

Documentation: WAYLIGHT 1250 LED [49.21“] - 071022

Sources

LED 25.2 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V - Dimmable 0-10 V
071050 LED 29.3 W 120-277 V 80 3000 - 12° 2808 1984 L80 - 60000 Download

Documentation: WAYLIGHT 1250 LED [49.21“] - 071050

071052 LED 29.3 W 120-277 V 80 4000 - 12° 3192 2246 L80 - 60000 Download

Documentation: WAYLIGHT 1250 LED [49.21“] - 071052

Sources

LED 29.3 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V
071002 LED 8 W 120-277 V 80 3000 - 12° 702 586 L80 - 60000 Download

Documentation: WAYLIGHT 420 LED [16.54“] - 071002

071004 LED 8 W 120-277 V 80 4000 - 12° 798 663 L80 - 60000 Download

Documentation: WAYLIGHT 420 LED [16.54“] - 071004

Sources

LED 8 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V - Dimmable 0-10 V
071024 LED 9.3 W 120-277 V 80 3000 - 12° 702 586 L80 - 60000 Download

Documentation: WAYLIGHT 420 LED [16.54“] - 071024

071032 LED 9.3 W 120-277 V 80 4000 - 12° 798 663 L80 - 60000 Download

Documentation: WAYLIGHT 420 LED [16.54“] - 071032

Sources

LED 9.3 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V
071006 LED 14.6 W 120-277 V 80 3000 - 12° 1404 975 L80 - 60000 Download

Documentation: WAYLIGHT 650 LED [25.59“] - 071006

071014 LED 14.6 W 120-277 V 80 4000 - 12° 1596 1104 L80 - 60000 Download

Documentation: WAYLIGHT 650 LED [25.59“] - 071014

Sources

LED 14.6 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V - Dimmable 0-10 V
071036 LED 16 W 120-277 V 80 3000 - 12° 1404 975 L80 - 60000 Download

Documentation: WAYLIGHT 650 LED [25.59“] - 071036

071038 LED 16 W 120-277 V 80 4000 - 12° 1596 1104 L80 - 60000 Download

Documentation: WAYLIGHT 650 LED [25.59“] - 071038

Sources

LED 16 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V
071016 LED 22.5 W 120-277 V 80 3000 - 12° 2106 1452 L80 - 60000 Download

Documentation: WAYLIGHT 950 LED [37.40“] - 071016

071018 LED 22.5 W 120-277 V 80 4000 - 12° 2394 1643 L80 - 60000 Download

Documentation: WAYLIGHT 950 LED [37.40“] - 071018

Sources

LED 22.5 W
  • Linear in-ground series. Fixtures consist of:
  • - Copper-free die-cast aluminum housing and die-cast corrosion-resistant AISI 316 stainless steel trim.
  • - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser.
  • - Custom molded, anti-aging gasket(s).
  • - Stainless steel external hardware.
  • - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life.
  • - Standard aimable optic system (±7°).
  • - High-transmittance transparent optics.
  • - 12° x 12° beam angle (C/I).
  • - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver.
  • - Pre-wired cable connects luminaire with WATER-STOP connection system, suitable for through wiring. Included cable glands accept cables from Ø0.35" up to Ø0.63".
  • - Each rough-in kit is provided with a protective faceplate to avoid possible deformations during the installation in concrete to simplify installation.
  • - For outdoor inground applications, provide drainage gravel at least 12" below the rough-in or a suitable drainage system.
  • - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options.
  • - Consult factory for frosted or non-slip glass options.
  • - 5-year warranty.
  • - Product meets Buy American Act requirements within ARRA.
Product codes
Part number Finish Lampholder Wattage Voltage CRI Kelvin Optic Optic
Beam
Lightsource
lumen
output
Luminaire
lumen
output
L B Lifetime Download
High Power LEDS 120-277 V - Dimmable 0-10 V
071040 LED 22.8 W 120-277 V 80 3000 - 12° 2106 1452 L80 - 60000 Download

Documentation: WAYLIGHT 950 LED [37.40“] - 071040

071042 LED 22.8 W 120-277 V 80 4000 - 12° 2394 1643 L80 - 60000 Download

Documentation: WAYLIGHT 950 LED [37.40“] - 071042

Sources

LED 22.8 W
to top
I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte nostra. Info